Touch it and the lock opens © ABUS

ABUS TOUCH™ 57 Finger on it - the lock opens

Discover the new generation of the fingerprint lock

Lock and unlock your shed in the garden, the communal cellar or valuable items conveniently by fingerprint. Your complete solution in terms of keyless padlock for indoors and outdoors - now even more secure, even easier to use and for up to 20 people.

About the product

Key-free © ABUS
Key-free
360° finger recognition © ABUS
360° finger recognition
Weatherproof © ABUS
Weatherproof

The ABUS Touch™ 57 makes your life a bit easier and safer. Finally, you no longer need to remember any number combinations and misplaced keys are also a thing of the past.

Hält jedem Wetter stand: Das ABUS Touch™ © ABUS

With the weatherproof, fingerprint-unlockable padlock ABUS Touch™ 57, you have the opportunity to spare yourself such stressful situations. Because it offers the keyless, secure and convenient solution for opening: Just touch - finger on it, the lock opens!

To view this content, you must agree to the use of cookies.

Your advantages 

  • SIMPLE OPERATION The padlock can be opened with only one hand. It requires neither a key nor a combination of numbers. The 360°-capable sensor identifies the up to 20 taught-in fingers from any position - no matter how they are placed. Enrolling fingerprints is super fast. As one of two administrators, simply place your own, already enrolled, finger on the fingerprint sensor for three seconds and the "enrollment mode" function is activated. Ten seconds are needed to get to the "delete mode" setting. Accidentally deleting the prints is thus almost impossible.
  • WATERPROOF: SUITABLE FOR OUTDOOR USE No rusting, no penetration of dirt and water: Its classification in protection classes IP 66 and IP 68 means that the ABUS Touch™ 57 can be used outdoors just as easily as indoors. On the one hand, it is protected against the ingress of dust and foreign bodies and, on the other, against heavy splashing water, such as from a garden hose or heavy rain. Another plus: The lock can also be dropped into water without moisture penetrating.
  • PROVEN ABUS SECURITY You can rely on our security standards, our experience and our proven quality: ABUS has been the expert in padlocks for almost a century. The ABUS Touch™ 57 is made of high-quality material. With its shackle made of specially hardened steel, the zinc body and the double ball lock, it is therefore currently one of the most secure fingerprint padlocks on the market. Another protective aspect: thanks to the fingerprint scanner and its encrypted memory, unauthorized persons are prevented from spying on a numerical code or stealing a key.
  • VERSATILE APPLICATION OPTIONS Whether for the cellar door with a multitude of neighbors, use on the construction site, access to the locker in the office or the shed with the bicycles: The keyless ABUS Touch™ 57 is suitable for countless applications. With it, there is never again the risk of losing one of the keys or forgetting the numerical code and having to replace the padlock. The 360° fingerprint sensor is ideal especially for children, who you don't want to give a key for the communal cellar or the locker at the sports club. The fingerprint lock is just as suitable for use in the gym, where a key would only get in the way during training.
  • THOUGHTFUL POWER SUPPLY  The lock is powered by a standard CR2 battery. Thanks to an efficient energy concept, up to 10,000 unlockings are possible with one battery. Massive external influences, such as heavy rain or extreme cold, can shorten battery life. When the voltage is low, the lock emits an SOS warning. This does not affect security. Changing the battery is child's play and is done by means of a screw on the underside. The stored fingerprints are retained in the process. Good to know: It is not possible to unlock the product when changing the battery.

Discover the ABUS Touch

Battery compartment ABUS Touch™ © ABUS
Battery replacement made easy - thanks to the battery compartment at the bottom of the fingerprint lock.
Finger on it, the lock opens © ABUS
Finger on it, green light and the lock opens.
Thanks to the 360° sensor, the ABUS Touch™ 57 detects the finger from any position © ABUS
Thanks to the 360° sensor, the lock detects the finger from any position.
Securing basements with the ABUS Touch™ and Cobra cable © ABUS
Never again stand in front of the bike basement without a key, because now your finger is the key.
Well secured: with the fingerprint lock and an ABUS chain © ABUS
Combine the fingerprint lock with chains, cables or hasps from ABUS.

Two sizes, one goal: comfortable safety.

Our fingerprint lock is available in two different shackle lengths: 57/45 and 57/50. The smaller version with a shackle thickness of 6.5 mm is suitable, for example, for locking lockers or trash cans. In most cases, the larger lock with a shackle thickness of 8 mm will fit a basement shed.

ABUS Touch™ 57: Red Dot Award Winner
One fingerprint lock - two sizes © ABUS
Fingerprint Padlock ABUS Touch™ 57
Special Locks / Fingerprint locks / Fingerprint Padlock
ABUS Touch™ 57/50
Compare
Fingerprint Padlock ABUS Touch™ 57/45
Special Locks / Fingerprint locks / Fingerprint Padlock
ABUS Touch™ 57/45
Compare

FAQ

The first two fingerprints that are registered in the ABUS Touch™ 57 are those of the administrator, one fingerprint each for the first and second administrator.

REGISTERING THE FIRST ADMINISTRATOR

  1. For the first fingerprint of the first admin, press and hold the sensor for three seconds until a beep sounds. The LEDs will light up blue.
  2. Then place your finger in different flat positions and hold it in place until a long signal tone sounds. The LEDs will flash green.

To view this content, you must agree to the use of cookies.

Start-Up & Register Admin 1

REGISTERING THE SECOND ADMINISTRATOR

  1. To register the second administrator's finger, the first admin presses and holds the sensor for three seconds. If their finger is successfully recognized, a signal tone will sound. The lock will open.
  2. Press and hold the sensor again until you hear a beep. The LEDs will light up blue. The first admin touches the lock with their finger to confirm.
  3. Now the second admin should place their finger in different, flat positions and hold until a long signal tone sounds. The LEDs will flash green

To view this content, you must agree to the use of cookies.

Video tutorial: Set up 2nd Admin fingerprint

REGISTERING MORE FINGERPRINTS

  1. An admin holds the sensor down for three seconds. Their finger must first be successfully recognized again: This is indicated by a signal tone. The lock will open.
  2. Press and hold the sensor again until the beep sounds. The LEDs will light up blue. The admin touches the lock with their finger to confirm.
  3. Now place the new finger to be registered in different, flat positions and hold it in place until a long signal tone sounds. The LEDs will flash green.

To view this content, you must agree to the use of cookies.

Video tutorial: Set up additional users

Important: Individual fingerprints cannot be deleted. During a deletion process, all stored fingerprints will be removed. The padlock is then reset to the factory setting.

DELETE ALL FINGERPRINTS - FACTORY SETTING

  1. To enter delete mode, an admin presses and holds the sensor for ten seconds. If their finger is recognized, the lock acknowledges this with a signal tone.
  2. Press and hold the sensor until you hear a beep again. The LEDs will light up red. To confirm the deletion, the admin touches the lock with a registered finger.
  3. A long beep and a green LED light signal that all fingerprints have been deleted. The padlock is reset to the factory setting.

To view this content, you must agree to the use of cookies.

Video tutorial: Reset to factory settings

In advance: all types of fingerprints can be registered - from any finger, young or old. For very large fingers, the print should be scanned over as large an area as possible in order to save all areas.

IMPORTANT:
When registering, both the finger and the sensor must be clean, because only an accurately registered finger is like a good key.

TIP:
It makes sense to save two different people as administrators and to register several fingers per person. This means that the lock can still be opened safely even if one finger is injured.

  1. Place the finger loosely on the sensor again and change its position if necessary.
  2. Check that both the sensor and the finger are clean and dry.
  3. Is it the right finger? It is possible that the wrong finger was applied.
  4. If fingers are frequently not recognised because the prints have changed (for example, due to disinfectants, burns or the like), the padlock can be reset to the factory setting. Re-register the fingers to do this.

The padlock emits an SOS signal to signify when the battery is low. A beep sounds and the LEDs flash red. After about ten SOS warnings, the lock can no longer be locked after the last opening. This prevents the user from locking themselves out.

REPLACE BATTERY

  1. Unscrew the battery compartment at the bottom of the padlock and remove the standard CR2 battery. Fingerprints will remain stored during this process.
  2. Insert a new CR2 battery and close the battery compartment. The lock will work perfectly again for up to 10,000 more openings.

DaThe padlock is assigned to protection classes IP 66 and IP 68 and is thus protected against dust and water. It is therefore suitable for both indoor and outdoor use.

Loading ...