Profi Motion Detector


The Profi motion detector is a passive infrared motion sensor (PIR sensor). It reacts to all types of heat movement and reports this to the alarm center. The best place to install the equipment is in a corner, between 2 and 3 meters above the floor. The intruder's possible direction of movement should be at right-angles to the sensor. Unsuitable for installation are all places opposite to sources of heat (e.g.: heating) or a window. Do not install the motion sensor near to electric cables, gas lines, or electronic equipment that generate heat during long periods of operation. The viewing angle of the Profi motion detector sensor is 90 degrees, and the detection range – depending on installation height – up to 15 x 15 meters. You can vary the sensitivity of the sensor with a jumper. This way, you can define the number of pulses that have to be detected before the sensor opens the alarm relay. The Profi motion detector sensor has an alarm memory. If the alarm center is disarmed following an alarm, the LED on the sensor that triggered the alarm lights up. Depending on the configuration, you can also see which motion sensor first triggered the alarm.

For safe and proper operation, this device must be installed and regularly maintained by a professional trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation in the long term with the latest security updates and new functions.

Product advantages

  • Passive infrared motion detector for indoor areas
  • Detects heat movements


We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging
Adjustable sensitivity: Yes
Alarm memory: Yes
Anti-creep protection: Yes
Connections: NC, 50 mA, 24 V DC
DC voltage supply: 12 V
Depth: 48 mm
Detector coverage area (m): 15 m
Dimensions: (WxHxD) 60x106x47 mm
Display: Yes
Height: 107 mm
Housing material: ABS
Installation location: Wall
Installation type: surface mounting
Length: 47 mm
Max. operating temperature: 55 °C
Net weight: 0,08 kg
Power consumption: 10 mA
Pulse selector switch: Yes
Sabotage monitoring: 1
Sensor type: Dual PIR
Status display: Yes
Type of detection: Heat detection
White-light filter: Yes
Width: 60 mm
Loading ...